Model 19GSR 1.9 in. Dia. Galvanized Roller Conveyor
The conveyor width is measured from the outside of one conveyor channel to the outside of the other. This is commonly referred to as the Overall Frame Width (OAW) of the conveyor. Please refer to the illustration for details:
WIDTHS: 18", 24", 30", 36", and 42" widths. FRAME: 3-1/2 in. deep x 1-1/2 in. flange x 10 ga. powder painted formed steel channel with bolt-in cross members. FLOOR SUPPORTS: Permanent type, H-style, light duty, maximum - 10 ft centers. BUTT COUPLINGS: Bolts on one end, hooks on opposite end. LENGTHS: 5', 10', 15', 20', and 25' lengths available. ROLLERS: 1.9 in. dia. x 16 ga. galvanized steel tubing. Bearings are labyrinth sealed and grease packed. AXLES: 7/16 in. hex shaft, spring loaded. CAPACITY: 135 lbs. maximum distributed live load per foot frame capacity.
NOTE: For lengths greater than those listed above, order combinations of lengths so that the sum of these units equals the total length desired.